Wi-Fi is a critical amenity as users bring more devices into hotel rooms,
meeting rooms, and classrooms. However, providing great Wi-Fi
performance in every room is cost-prohibitive.
The RUCKUS H320 combines an 802.11ac Wave 2 Wi-Fi access point and wired switch into
one wall-mount device. Designed specLfically for per-room deployments, the H320 is compact,
inconspicuous, secure, and easy to mount to an electrical junction box. Bottom facing Ethernet
ports eliminate unsightly cabling and accommodates any furniture placement.
Easily supports converged wired and wireless services with one device, that include VoIP, IPTV,
high-speed Internet access and in-room Wi-Fi device connectivity.
This 802.11ac Wave 2 Wi-Fi AP and switch incorporates patented technologies found only in
the Ruckus Wi-Fi portfolio.
· Extended coverage with patented BeamFlex+ utilizing multi-directional antenna patterns
· Improved throughput with ChannelFly which dynamically find less congested Wi-Fi channels
to use
The H320 supports Multi-User MIMO (MU-MIMO) which increases network throughput by
transmitting to multiple clients simultaneously.
Support per-room wired IP devices from TVs to phones with 2 onboard Ethernet ports. Also,
with built-in visual troubleshooting tools within Ruckus Wi-Fi controllers, administrators can
accelerate resolution of trouble tickets.
Whether organizations are deploying ten or ten thousand APs, the H320 can be deployed as
a standalone AP or centrally managed by SmartZone or ZoneDirector management platforms.

Access Point Antenna Pattern
Ruckus' BeamFlex+ adaptive antennas allow the H320 AP to dynamically choose among a host
of antenna patterns in real-time to establish the best possible connection with every device. This
leads to:
· Better Wi-Fi coverage
· Reduced RF interference
Traditional omni-directional antennas, found in generic access points, oversaturate the
environment by needlessly radiating RF signals in all directions. In contrast, the Ruckus
BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to
optimize Wi-Fi coverage and capacity in real-time to support high device density environments.
BeamFlex+ operates without the need for device feedback and hence can benefit even devices
using legacy standards.

Specifications

WI-FI
Wi-Fi Standards · IEEE 802.11a/b/g/n/ac Wave 2
Supported Rates
· 802.11ac: 6.5 to 867Mbps (MCS0 to MCS9, NSS = 1 to
2 for VHT20/40/80)
· 802.11n: 6.5Mbps to 150Mbps (MCS0 to MCS7)
· 802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
· 802.11b: 11, 5.5, 2 and 1 Mbps
Supported Channels*
· 2.4GHz: 1-13
· 5GHz: 36-64, 100-144, 149-165
MIMO
· 1x1 2.4GHz
· 2x2 MU-MIMO 5GHz
Spatial Streams
· 1 Stream 2.4GHz
· 2 Streams SU/MU-MIMO 5GHz
Radio Chains and Streams · 2x2:2
Channelization · 20, 40, 80MHz
Security
· WPA-PSK, WPA-TKIP, WPA2 AES, 802.11i, Dynamic PSK
· WIPS/WIDS
Other Wi-Fi Features
· WMM, Power Save, Tx Beamforming, LDPC, STBC,
802.11r/k/v
· Captive Portal
· Hotspot
· Hotspot 2.0
· WISPr

RF
Antenna Type
· BeamFlex+ adaptive antennas with polarization diversity
· Adaptive antenna that provides multiple-antenna
patterns per band
Antenna Gain (max) · Up to 3dBi
Peak Transmit Power
(aggregate across MIMO
chains)
· 2.4GHz: 16dBm
· 5GHz: 20dBm
Minimum Receive
Sensitivity1
· -99dBm
Frequency Bands
· ISM (2.4-2.484GHz)
· U-NII-1 (5.15-5.25GHz)
· U-NII-2A (5.25-5.35GHz)
· U-NII-2C (5.47-5.725GHz)
· U-NII-3 (5.725-5.85GHz)

NETWORKING
Controller Platform
Support
· SmartZone
· ZoneDirector
· Cloud Wi-Fi
· Unleashed2
· Standalone
Mesh · No Mesh support
IP · IPv4, IPv6, dual-stack
VLAN
· 802.1Q (1 per BSSID or dynamic per use based on RADIUS)
· Port-based
802.1x · Authenticator & Supplicant
Policy Management Tools
· Application Recognition and Control
· Access Control Lists
· Device Fingerprinting

PHYSICAL INTERFACES
Ethernet
· One 1GbE port backhaul, PoE (802.11af/at)
· 2 x 10/100Mbps Ethernet switch ports

PHYSICAL CHARACTERISTICS
Physical Size
· 89 mm (W) x 136 mm (L), 29 mm (H)
· 3.5in (W) x 5.35in (L) x 1.1in (H)
Weight
· 195g without bracket (6.9oz)
· 276g with bracket (9.7oz)
Mounting
· Electrical wallbox; Standard US and EU single gang wall
jack
· Optional bracket for offset & wall mount
Operating Temperature · 0°C (32°F) - 40°C (104°F)
Operating Humidity · Up to 95%, non-condensing